2013.9 – 2017.2，英国巴斯大学（University of Bath），机械工程学院 ，博士 – 机械工程
2010.9 – 2013.1，北京航空航天大学， 能源与动力工程学院，硕士 – 动力工程与工程热物理
2010.1 – 2010.6，法国巴黎高等航空技术与汽车制造学院， 航空航天工程，国际交换 – 航空航天工程
2006.9 – 2010.6，北京航空航天大学，能源与动力工程学院，本科 – 动力工程与工程热物理  

2026.3 至今，365英国上市公司官网，365英国上市公司官网，副教授
2025.6 – 2026.1，英国巴斯大学，机械工程学院，Senior Lecturer（副教授，永久教职，博士生导师）
2020.2 – 2025.5，英国巴斯大学，机械工程学院，Lecturer（助理教授，永久教职，博士生导师）
2018.5 – 2020.5，英国巴斯大学，机械工程学院，Prize Fellow（博士生导师）
2017.2 – 2018.5，英国巴斯大学，机械工程学院，Research Associate（博士后）

招生名额：每年可招收博士、硕士研究生(27年博士硕士名额已满), 欢迎夏令营、保研、考研、申博学生联系！

1. 航空发动机燃气轮机高速旋转流动换热实验研究和建模

现代航发燃机的转速高达 12000 转每分钟，运行温度高于 2000 摄氏度，压力高达 70 倍大气压，因此旋转盘等旋转部件在承受高旋转应力的同时还需承受高温和高压。如果旋转盘热应力和热膨胀过高，将大幅降低发动机的寿命、效率和可靠性，甚至导致发动机失效。热应力和热膨胀取决于旋转盘的温度分布，而温度分布则受控于盘腔内部的流动和换热。因此可靠的盘腔流动换热机理认识和预测方法是获得发动机高性能、高可靠性和高经济性的关键。因此针对旋转盘腔流动换热的机理实验研究和理论预测方法是航发燃机领域的重点研究方向。

2. 机器学习在复杂流动换热建模中的应用

复杂流动换热广泛存在于热防护、换热器、相变冷却、高超声速热边界层等工程场景，流动分离、强湍流、多尺度涡结构与耦合传热等特征导致流动换热机理认识不足且预测难度大，高精度 CFD 数值模拟成本高昂，现有经验模型预测精度不足且多工况泛化性差。该方向融合机器学习与复杂流动传热理论，构建物理和实验共同驱动的流动换热模型，提高预测效率和精度，并应用于航空、能源、热管理装备工程优化设计中。

3. 超高压比航空发动机叶尖间隙预测及主被动控制技术等

航空发动机叶片高度随压比升高而降低，从而导致相对叶尖间隙升高。为了获得高效率和高可靠性，需开展压气机全工况叶尖间隙协调设计，开展叶尖间隙变化的物理机理研究，通过实验研究和理论建模增强对不同工况叶尖间隙变化特性的理解，建立适用于航空发动机设计过程的物理模型。此外，可基于实验和建模建立叶尖间隙变化的机器学习模型，实时预测压气机全工况叶尖间隙，从而开展对机匣设计参数的优化和调控，从而达到优化叶尖间隙设计的目的。

4. 航发燃机空气系统建模

航空发动机燃气轮机空气系统是从主流引取不同层级压缩空气，用于涡轮冷却封严、轴承腔封严、防冰等，保障整机高温部件可靠工作。空气系统流量超过总流量 20% 且流动结构复杂，设计直接影响高温部件的冷却密封效果和冷气消耗量，进而影响航发 / 燃机的整机效率和运行安全性。因此需要对空气系统各元件如减涡器、涡轮动静盘腔、篦齿 / 蜂窝封严、冷却引气管路、压气机旋转盘腔等内部流动换热进行快速可靠的预测。该方向集中于不同元件的理论建模和实验验证，并最终应用于航发燃机空气系统设计程序中。

• 中国工程热物理学会青年工作委员会（热机气动热力学工作组）委员

• 美国机械工程师协会（ASME）传热协会会员

• 英国巴斯大学高级访问研究员（Visiting Senior Research Fellow）

• 2025, ASME Turbo Expo 会议组织—空气系统方向总负责人（Vanguard Chair）

• 2024, ASME Turbo Expo 会议最佳论文评审委员会成员（Best Paper Committee Member）

• 2024, ASME Turbo Expo 会议伦敦联络会成员（Local Liaison Committee）

• 2022、2023、2024、2025年ASME Turbo Expo 会议分会主席（Session Chair）

• Appl. Therm. Eng., ASME J. Eng. Gas Turbines Power, ASME J. Turbomach, Thermal Sci. Eng. Appl., Int. J. Heat Mass Transf等期刊审稿人

• 2025.1，英国工程与物理科学研究委员会项目PI–旋转盘腔理论建模：在发动机设计程序中的应用
• 2024.4，德国西门子公司项目课题负责人 – 燃气轮机旋转盘腔实验理论研究
• 2024.3，英国皇家学会中英交流项目PI– 贝叶斯理论以及深度神经网络在瞬态传热实验上的应用
• 2023.2，法国赛峰公司项目课题负责人– 燃气入侵理论建模
• 2021.9，英国工程与物理科学研究委员会博士研究项目导师 – 先进航空发动机技术
• 2021.7，英国工程与物理科学研究委员会博士研究项目导师 – 航空发动机高空结冰理论建模
• 2022.1，英国工程与物理科学研究委员会博士研究项目导师 – 3D打印换热器设计与优化 
• 2020.10，德国西门子公司博士研究项目导师 – 旋转盘腔流动流固数值模拟
• 2021.6，英国工程与物理科学研究委员会项目CoI - 燃气入侵密度差影响
• 2017.1，英国工程与物理科学研究委员会项目指定研究员 - 航空发动机压气机内部旋转流动

在流体力学、传热传质，叶轮机械研究领域发表44篇SCI期刊论文，25篇EI会议论文.

Journal Publication:

2026

    Syncerz, S., Lafone-Ward, D. W., Mohamed, M., Tang, H., Lock, G. D., and Scobie, J. A. (August 28, 2026). "Entrainment of Swirled Axial Throughflow in a Rotating Compressor Cavity under Centrifugal Buoyancy-Driven Convection." ASME. J. Turbomach. doi: https://doi.org/10.1115/1.4072648

    Nicholas, T. E. W., Pernak, M. J., Lock, G. D., Scobie, J. A., and Tang, H. (February 27, 2026). "Fundamental Model for Compressor Cavity Heat Transfer: Theory and Validation." ASME. J. Turbomach. doi: https://doi.org/10.1115/1.4071240

2025

    Boldero, J. S., Vella, S., Tang, H., Scobie, J. A., Lock, G. D., & Sangan, C. M. (2025). The Effect of the Purge–Mainstream Density Ratio on Rim Seal Fluid Mechanics. International Journal of Turbomachinery, Propulsion and Power, 10(4), 46. https://doi.org/10.3390/ijtpp10040046 

    Vella, S., Salvatori, F., Scobie, J. A., Lock, G. D., Sangan, C. M., and Tang, H. (December 4, 2025). "Scaling Sealing Performance Across Engine Operating Conditions." ASME. J. Eng. Gas Turbines Power. June 2026; 148(6): 061002. https://doi.org/10.1115/1.4070053

    Vella, S., Scobie, J. A., Lock, G. D., Sangan, C. M., and Tang, H. (December 10, 2025). "Synchronization of the Unsteady Pressure Field: An Explanation for Amplified Ingress." ASME. J. Turbomach. May 2026; 148(5): 051013. https://doi.org/10.1115/1.4069941

    Syncerz, S., Nicholas, T., Tang, H., Lock, G. D., and Scobie, J. A. (October 23, 2025). "The Influence of Axial Throughflow Swirl on Buoyancy-Induced Flow in a Compressor Cavity." ASME. J. Turbomach. April 2026; 148(4): 041011. https://doi.org/10.1115/1.4069938 
    Harrington, J., Vella, S., Tang, H., Lock, G. D., Scobie, J. A., Santara, F. B., Jarrossay, C., Bonneau, D., Salvatori, F., and Sangan, C. M. (December 10, 2025). "The Adverse Effect of Pre-Swirl on Ingestion in a Downstream Cavity." ASME. J. Turbomach. June 2026; 148(6): 061012. https://doi.org/10.1115/1.4070350

    Tang, H, Vella, S, Sangan, C, Scobie, J & Lock, G 2025, 'Ingress Wave Model with Purge-Mainstream Density Ratio', International Journal of Heat and Mass Transfer, vol. 237, 126372. https://doi.org/10.1016/j.ijheatmasstransfer.2024.126372 
    Nicholas, TEW, Pernak, MJ, Lock, GD, Scobie, JA & Tang, H 2025, 'Mass and Heat Exchange in Rotating Compressor Cavities With Variable Cob Separation', ASME Journal of Engineering for Gas Turbines and Power, vol. 147, no. 1, 011018. https://doi.org/10.1115/1.4066247

2024

    Vella, S., Tang, H., Carnevale, M., Scobie, J. A., Lock, G. D., Salvatori, F., and Sangan, C. M. (December 11, 2024). "On the Relationship Between Swirl and Unsteadiness Within Turbine Rim Seals." ASME. J. Eng. Gas Turbines Power. April 2025; 147(4): 041031. https://doi.org/10.1115/1.4066997

    Pernak, M. J., Nicholas, T. E. W., Carnevale, M., Lock, G. D., Tang, H., and Scobie, J. A. (December 10, 2024). "Flow and Heat Transfer in Rotating Compressor Cavities With Inverted Shroud-Throughflow Temperature Differences." ASME. J. Turbomach. July 2025; 147(7): 071005. https://doi.org/10.1115/1.4067075

    Nicholas, T, Pernak, M, Williams, J, Lock, G, Scobie, J & Tang, H 2025, 'Transient Buoyancy-Induced Flow and Heat Transfer in Rotating Compressor Cavities', Applied Thermal Engineering, vol. 262, 125129. https://doi.org/10.1016/j.applthermaleng.2024.125129 
    Peters, T, Shelton, J, Tang, H & Trinh, P 2024, 'An enthalpy-based model for the physics of ice crystal icing', Journal of Fluid Mechanics, vol. 1001, A12, pp. A12-43. https://doi.org/10.1017/jfm.2024.1054 
    D. Graikos, H. Tang, M. Carnevale, N. Y. Bailey, J. A. Scobie; Rotationally induced ingress in rotor–stator systems. Physics of Fluids 1 July 2024; 36 (7): 075141. https://doi.org/10.1063/5.0207140

    Parry, J, Tang, H, Scobie, J, Lock, G & Carnevale, M 2024, 'Conjugate Modeling of a Closed Co-Rotating Compressor Cavity', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 146, no. 5, 051007. https://doi.org/10.1115/1.4063632 
    Nicholas, TEW, Scobie, JA, Lock, GD & Tang, H 2024, 'A Model of Mass and Heat Transfer for Disc Temperature Prediction in Open Compressor Cavities', Journal of Turbomachinery: Transactions of the ASME, vol. 146, no. 4, 041001. https://doi.org/10.1115/1.4064082 
    Tang, H, Scobie, J, Wang, Z & Lock, G 2024, 'A theoretical model for ingress through turbine rim seals based on physically observed unsteadiness', International Journal of Heat and Fluid Flow, vol. 106, 109300. https://doi.org/10.1016/j.ijheatfluidflow.2024.109300

2023
    Pernak, M, Nicholas, T, Williams, J, Jackson, R, Tang, H, Lock, G & Scobie, J 2023, 'Experimental Investigation of Transient Flow Phenomena in Rotating Compressor Cavities', Journal of Turbomachinery: Transactions of the ASME, vol. 145, no. 12, TURBO-23-1143. https://doi.org/10.1115/1.4063507 
    Nicholas, TEW, Pernak, MJ, Scobie, JA, Lock, GD & Tang, H 2023, 'Transient heat transfer and temperatures in closed compressor rotors', Applied Thermal Engineering, vol. 230, no. Part B, 120759. https://doi.org/10.1016/j.applthermaleng.2023.120759 
    Tang, H & Owen, JM 2023, 'Plume Model for Buoyancy-Induced Flow and Heat Transfer in Closed Rotating Cavities', Journal of Turbomachinery, vol. 145, no. 1, 011005 . https://doi.org/10.1115/1.4055449
    Lock, G, Jackson, R, Pernak, M, Pountney, O, Sangan, C, Owen, JM, Tang, H & Scobie, J 2023, 'Stratified and Buoyancy-Induced Flow in Closed Compressor Rotors', Journal of Turbomachinery, vol. 145, no. 1, 011008. https://doi.org/10.1115/1.4055448

2022
    Graikos, D, Tang, H, Sangan, C, Lock, G & Scobie, J, 2022, 'A New Interpretation of Hot Gas Ingress Through Turbine Rim Seals Influenced by Mainstream Annulus Swirl', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 144, no. 11, 111005 . https://doi.org/10.1115/1.4055457 
    Bailey, N, Owen, M, Mear, IF & Tang, H, 2022, 'Prediction of flows in enclosed rotor-stator cavities', Physics of Fluids, vol. 34, no. 10, 105115. https://doi.org/10.1063/5.0107336 
    Cao, N, Luo, X & Tang, H, 2022, 'A Bayesian model to solve a two-dimensional inverse heat transfer problem of gas turbine discs', Applied Thermal Engineering, vol. 214, 118762. https://doi.org/10.1016/j.applthermaleng.2022.118762 
    Jackson, R, Tang, H, Scobie, J, Owen, M & Lock, G, 2022, 'Measurement of Heat Transfer and Flow Structures in a Closed Rotating Cavity', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 144, no. 5, 051005 . https://doi.org/10.1115/1.4053392 
    Jackson, R, Tang, H, Scobie, J, Pountney, O, Sangan, C, Owen, M & Lock, G, 2022, 'Unsteady Pressure Measurements in a Heated Rotating Cavity', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 144, no. 4, 041017. https://doi.org/10.1115/1.4053390 
    Tang, H, Deveney, T, Shardlow, T & Lock, G, 2022, 'Use of Bayesian statistics to calculate transient heat fluxes on compressor disks', Physics of Fluids, vol. 34, no. 5, 056108. https://doi.org/10.1063/5.0091371

2021
    Pountney, O, Patinios, M, Tang, H, Luberti, D, Sangan, C, Scobie, J, Owen, M & Lock, G, 2021, 'Calibration of thermopile heat flux gauges using a physically-based equation', Proceedings of the Institution of Mechanical Engineers Part A: Journal of Power and Energy, vol. 235, no. 7, pp. 1806-1816. https://doi.org/10.1177/0957650920982103 
    Jackson, R, Tang, H, Scobie, J, Pountney, O, Sangan, C, Owen, M & Lock, G, 2021, 'Analysis of shroud and disk heat transfer in aero-engine compressor rotors', Journal of Engineering for Gas Turbines and Power, vol. 143, no. 9, 091005. https://doi.org/10.1115/1.4050631 
    Jackson, R, Luberti, D, Tang, H, Pountney, O, Scobie, J, Sangan, C, Owen, M & Lock, G, 2021, 'Measurement and Analysis of Buoyancy-Induced Heat Transfer in Aero-Engine Compressor Rotors', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 143, no. 6, 061004. https://doi.org/10.1115/1.4049100 
    Tang, H & Owen, M, 2021, 'Effect of Radiation on Heat Transfer inside Aeroengine Compressor Rotors', Journal of Turbomachinery, vol. 143, no. 5, 051005. https://doi.org/10.1115/1.4050114 
    Luberti, D, Patinios, M, Jackson, R, Tang, H, Pountney, O, Scobie, J, Sangan, C, Owen, M & Lock, G, 2021, 'Design and Testing of a Rig to Investigate Buoyancy-Induced Heat Transfer in Aero-Engine Compressor Rotors', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 143, no. 041030. https://doi.org/10.1115/1.4048601

2020
    Luberti, D, Tang, H, Scobie, J, Pountney, O, Owen, M & Lock, G 2020, 'Influence of Temperature Distribution on Radial Growth of Compressor Discs', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 142, no. 7, 071004. https://doi.org/10.1115/1.4046704

2019
    Tang, H, Cho, GH, Patinios, M, Scobie, J, Sangan, C, Owen, J & Lock, G 2019, 'Effect of Ingress on Flow and Heat Transfer Upstream and Downstream of a Rotating Turbine Disc', Aerospace, vol. 6, no. 5, 49, pp. 1-15. https://doi.org/10.3390/aerospace6050049 
    Owen, J, Tang, H & Lock, G 2019, 'Model of Effect of Hot Gas Ingress on Temperatures of Turbine Disks', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 141, no. 1, 012501, pp. 1-9. https://doi.org/10.1115/1.4040680

2018
    Tang, H, Puttock-Brown, MR & Owen, JM 2018, 'Buoyancy-Induced Flow and Heat Transfer in Compressor Rotors', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 140, no. 7, 071902. https://doi.org/10.1115/1.4038756 
    Owen, JM, Tang, H & Lock, GD 2018, 'Buoyancy-Induced Heat Transfer inside Compressor Rotors: Overview of Theoretical Models', Aerospace, vol. 5, no. 1, 32, pp. 1-22. https://doi.org/10.3390/aerospace5010032 
    Tang, H & Owen, J 2018, 'Theoretical Model of Buoyancy-Induced Heat Transfer in Closed Compressor Rotors', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 140, no. 3, 032605, pp. 1-7. https://doi.org/10.1115/1.4037926

2017
    Tang, H & Michael Owen, J 2017, 'Effect of buoyancy-induced rotating flow on temperatures of compressor disks', Journal of Engineering for Gas Turbines and Power: Transactions of the ASME, vol. 139, no. 6, 062506. https://doi.org/10.1115/1.4035400

2016
    Cho, GH, Tang, H, Owen, JM & Lock, GD 2016, 'On the measurement and analysis of data from transient heat transfer experiments', International Journal of Heat and Mass Transfer, vol. 98, pp. 268-276. https://doi.org/10.1016/j.ijheatmasstransfer.2016.03.009

2015
    Tang, H, Shardlow, T & Owen, JM 2015, 'Use of fin equation to calculate Nusselt numbers for rotating disks', Journal of Turbomachinery: Transactions of the ASME, vol. 137, no. 12, 121003, pp. 1-10. https://doi.org/10.1115/1.4031355 
    Owen, JM & Tang, H 2015, 'Theoretical model of buoyancy-induced flow in rotating cavities', Journal of Turbomachinery: Transactions of the ASME, vol. 137, no. 11, TURBO-15-1037. https://doi.org/10.1115/1.4031353

Conferences:

2025

    Nicholas, TEW, Pernak, MJ, Lock, GD, Scobie, JA, & Tang, H. "Fundamental Model for Compressor Cavity Heat Transfer: Theory and Validation." Proceedings of the ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition. Memphis, Tennessee, USA. June 16–20, 2025. V006T14A007. ASME. https://doi.org/10.1115/GT2025-152729
    Vella, S, Salvatori, F, Scobie, JA, Lock, GD, Sangan, CM, & Tang, H. "Scaling Sealing Performance Across Engine Operating Conditions." Proceedings of the ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition. Memphis, Tennessee, USA. June 16–20, 2025. V006T14A008. ASME. https://doi.org/10.1115/GT2025-152884
    Vella, S, Scobie, JA, Lock, GD, Sangan, CM, & Tang, H. "Synchronisation of the Unsteady Pressure Field: an Explanation for Amplified Ingress." Proceedings of the ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition. Memphis, Tennessee, USA. June 16–20, 2025. V006T14A009. ASME. https://doi.org/10.1115/GT2025-152901
    Harrington, J, Vella, S, Tang, H, Lock, GD, Scobie, JA, Bintou Santara, F, Jarrossay, C, Bonneau, D, Salvatori, F, & Sangan, CM. "The Adverse Effect of Pre-Swirl on Ingestion in a Downstream Cavity." Proceedings of the ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition. Memphis, Tennessee, USA. June 16–20, 2025. V006T14A017. ASME. https://doi.org/10.1115/GT2025-154102
    Syncerz, S, Nicholas, TEW, Lock, GD, Tang, H, & Scobie, JA. "The Influence of Axial Throughflow Swirl on Buoyancy-Induced Flow in a Compressor Cavity." Proceedings of the ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition. Memphis, Tennessee, USA. June 16–20, 2025. V006T14A006. ASME. https://doi.org/10.1115/GT2025-152677
    Jason S. Boldero, Simon Vella, Hui Tang,  James A. Scobie, Gary D. Lock, and Carl M. Sangan, “The effect of purge-mainstream density ratio on rim seal fluid mechanics”, Paper Number ETC2025-210, Published at Proceedings of the 16th European Turbomachinery Conference (ETC16)  Turbomachinery, Fluid Dynamics and Thermodynamics, March 24-28, 2025; Hannover, Germany

2024
    Nicholas, T, Pernak, M, Lock, G, Scobie, J & Tang, H 2024, Mass and Heat Exchange in Rotating Compressor Cavities with Variable Cob Separation. in Heat Transfer: Internal Air Systems; Heat Transfer: Internal Cooling; Industrial and Cogeneration., V008T14A011, Proceedings of the ASME Turbo Expo, vol. 8, ASME, ASME 2024 Turbomachinery Technical Conference & Exposition, London, UK United Kingdom, 23/06/24. https://doi.org/10.1115/GT2024-126600 
    Vella, S, Tang, H, Carnevale, M, Scobie, J, Lock, G, Salvatori, F & Sangan, C 2024, On the Relationship Between Swirl and Unsteadiness Within Turbine Rim Seals. in Heat Transfer., GT2024-129016, ASME 2024 Turbomachinery Technical Conference & Exposition, London, UK United Kingdom, 23/06/24. https://doi.org/10.1115/GT2024-129016 
    Pernak, M, Nicholas, T, Carnevale, M, Lock, G, Tang, H & Scobie, J 2024, Flow and Heat Transfer in Rotating Compressor Cavities With Inverted Shroud-Throughflow Temperature Differences. in Heat Transfer: Internal Air Systems; Heat Transfer: Internal Cooling; Industrial and Cogeneration., V008T14A003, Proceedings of the ASME Turbo Expo, vol. 8, American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/GT2024-123211

2023
    Nicholas, T, Scobie, J, Lock, G & Tang, H 2023, A Model of Mass and Heat Transfer for Disc Temperature Prediction in Open Compressor Cavities. in Heat Transfer: Internal Air Systems. vol. 7B, GT2023-102248, ASME Turbo Expo 2023, Boston, Massachusetts, USA United States, 26/06/23. https://doi.org/10.1115/GT2023-102248 
    Parry, J, Tang, H, Scobie, JA, Lock, GD & Carnevale, M 2023, Conjugate Modelling of a Closed Co-Rotating Compressor Cavity. in Heat Transfer: Internal Air Systems. vol. 7B, GT2023-102900, ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, 26/06/23. https://doi.org/10.1115/GT2023-102900 
    Pernak, MJ, Nicholas, TEW, Williams, JT, Jackson, RW, Tang, H, Lock, GD & Scobie, JA 2023, Experimental Investigation of Transient Flow Phenomena in Rotating Compressor Cavities. in Heat Transfer: Internal Air Systems. vol. 7B, GT2023-102294, ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, 26/06/23. https://doi.org/10.1115/GT2023-102294

2022
    Tang, H & Owen, M 2022, Plume model for buoyancy-induced flow and heat transfer in closed rotating cavities. in Heat Transfer - General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling., V06BT14A002, Proceedings of the ASME Turbo Expo, vol. 6-B, American Society of Mechanical Engineers (ASME), ASME Turbo Expo 2022, Rotterdam, Netherlands, 13/06/22. https://doi.org/10.1115/GT2022-80477 
    Lock, G, Jackson, R, Pernak, M, Pountney, O, Sangan, C, Owen, M, Tang, H & Scobie, J 2022, Stratified and Buoyancy-Induced Flow in Closed Compressor Rotors. in Heat Transfer - General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling., V06BT14A007, Proceedings of the ASME Turbo Expo, vol. 6-B, American Society of Mechanical Engineers (ASME), ASME Turbo Expo 2022, Rotterdam, Netherlands, 13/06/22. https://doi.org/10.1115/GT2022-82023 
    Graikos, D, Tang, H, Sangan, C, Lock, G & Scobie, J 2022, A New Interpretation of Hot Gas Ingress Through Turbine Rim Seals Influenced by Mainstream Annulus Swirl. in Heat Transfer - General Interest/Additive Manufacturing Impacts on Heat Transfer; Internal Air Systems; Internal Cooling., V06BT14A008, Proceedings of the ASME Turbo Expo, vol. 6-B, American Society of Mechanical Engineers (ASME), ASME Turbo Expo 2022, Rotterdam, Netherlands, 13/06/22. https://doi.org/10.1115/GT2022-82430 
2021

    Jackson, R, Tang, H, Scobie, J, Pountney, O, Sangan, C, Owen, M & Lock, G 2021, Unsteady Pressure Measurements in a Heated Rotating Cavity. in Proceedings of ASME Turbo Expo 2021: Volume 5B., V05BT14A005, Proceedings of the ASME Turbo Expo, vol. 5B-2021, American Society of Mechanical Engineers (ASME), U. S. A., ASME Turbo Expo 2021, 7/06/21. https://doi.org/10.1115/GT2021-59090 
    Jackson, R, Tang, H, Scobie, J, Owen, M & Lock, G 2021, Measurement of Heat Transfer and Flow Structures in a Closed Rotating Cavity. in Proceedings of the ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition: Volume 5B., V05BT14A013, Proceedings of the ASME Turbo Expo, vol. 5B-2021, U. S. A., ASME Turbo Expo 2021, 7/06/21. https://doi.org/10.1115/GT2021-59605 
2020

    Luberti, D, Patinios, M, Jackson, R, Tang, H, Pountney, O, Scobie, J, Sangan, C, Owen, M & Lock, G 2020, Design and Testing of a Rig to Investigate Buoyancy-Induced Heat Transfer in Aero-Engine Compressor Rotors. in Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition ., GT2020-14422, Proceedings of the ASME Turbo Expo 2020.
    Jackson, R, Luberti, D, Tang, H, Pountney, O, Scobie, J, Sangan, C, Owen, M & Lock, G 2020, Measurement and Analysis of Buoyancy-Induced Heat Transfer in Aero-Engine Compressor Rotors. in Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition., GT2020-16219, Proceedings of the ASME Turbo Expo.
    Jackson, RW, Luberti, D, Tang, H, Pountney, OJ, Scobie, JA, Sangan, CM, Owen, JM & Lock, GD 2020, Measurement and analysis of buoyancy-induced heat transfer in aeroengine compressor rotors. in Heat Transfer. Proceedings of the ASME Turbo Expo, vol. 7C-2020, The American Society of Mechanical Engineers(ASME), ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, GT 2020, Virtual, Online, 21/09/20. https://doi.org/10.1115/GT2020-16219

2019
    Luberti, D, Tang, H, Scobie, J, Pountney, O, Owen, M & Lock, G 2019, Influence of temperature distribution on radial growth of compressor discs. in Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition., GT2019-91848, American Society of Mechanical Engineers (ASME), ASME Turbo Expo 2019, Phoenix, USA United States, 17/06/19.

2017
    Tang, H & Owen, J 2017, Theoretical Model of Buoyancy-Induced Heat Transfer in Closed Compressor Rotors. in ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. vol. Volume 5B: Heat Transfer, GT2017-63060, Charlotte, North Carolina, USA, pp. V05BT15A002.

2016
    Tang, H & Owen, J 2016, Effect of Buoyancy-Induced Rotating Flow on Temperatures of Compressor Discs. in ASME Proceedings. vol. 5A: Heat Transfer, GT2016-56374, ASME, New York, USA, pp. V05AT15A004, ASME Turbo Expo 2016, Seoul, Korea, Democratic People's Republic of, 13/06/16.

2015
    Tang, H, Shardlow, T & Owen, JM 2015, Use of fin equation to calculate nusselt numbers for rotating discs. in Proceedings ASME Turbo Expo, 2015: Turbine Technical Conference and Exposition, Volume 5C, Heat Transfer. American Society of Mechanical Engineers (ASME), pp. V05CT00A001, ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, GT 2015, Montreal, Canada, 15/06/15. https://doi.org/10.1115/GT2015-42029